OKX Wallet login

List of catalogs of this article:

• 1, How to turn on the high beam of the car
• 2, How to use car high beam
• 3、 What is the standard distance of car lights?
• 4, When will the high beam of the car be turned on?
• 5、How to turn on the high beam of the car

Car far How to turn on the light

1. Usually, the high beam is usually turned on by turning the switch to the position of the hood; back one gear, turn off the high beam and restore the low beam; turn one gear to the driver's direction and temporarily flash the high beam. After releasing the switch, the switch will automatically return to the near-light gear. This is usually used to remind vehicles in the opposite lane, that is, alternating high and near lights.

2. There are several ways to turn on the high beam: turn the left joystick towards the driver, turn on the high beam, automatically reset the joystick after release, and turn off the high beam.This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

3. The use of high beams is generally by pulling forward or pulling inward, pulling forward, and turning on the high beam all the time.

4. (1) The left joystick is turned in the direction of the driver, and the high beam is turned on. After the hand is released, the joystick is automatically reset and the high beam is turned off. This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

How to use the car high beam

1. The use of the high beam is generally by pulling forward or pulling inward, pulling forward, pulling forward, and always turning on the high beam.

2. There are several ways to turn on the high beam: (1) The left joystick is turned on in the direction of the driver, the high beam is turned on, the joystick is automatically reset after the hand is released, and the high beam is turned off. This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

3. The usage of high beams is as follows: Master the timing of turning on the high beam: do not turn on the high beam when driving on street lights or other well-lit roads.

What is the standard distance of car lights?

Usually, the irradiation distance of the low beam is 1030 meters, and the irradiation range is about 160°. 2 The high beam of the car is relatively concentrated, and the highlights are large, which can shine to higher and farther places. Usually, it is 80,120 meters. 3 The irradiation distance of the headlights of the car is generally at least 100 More than 200 meters.

The standard of direct shooting spacing of automobile near lights is about 30-40 meters, and the brightness and darkness of the light is 12 meters to 18 meters long. If the direct distance is far away, because the light intensity is relatively limited, all the roads in front of you will become dull, and the narrow items and potholes on the road will not be visible, which is not conducive to safe driving.

Usually, the irradiation distance of the low beam is 10-30 meters. The irradiation range is about 160°. The high beam of the car is relatively concentrated, and the highlight is large, which can shine to higher and further places. Usually, it is 80-120 meters. The irradiation distance of the headlights of the car is generally at least 10 More than 0-200 meters.

The irradiation distance of the low beam is about 30-40 meters. According to the experiment, when driving at a speed of 55 km/h at night, the situation was found to be immediately braked, and the parking distance was exactly 30 meters. That is, when the situation is found within the range of low-beam light and stops immediately, there is no gap between the car and the object.

The standard direct distance of the low beam lamp is about 30-40 meters, and the light cut-off line is 12-18 meters long. If the direct shooting distance is far, it is because the light is limited, and the road in front of you will basically become without light.Narrow objects and potholes on the ground will not be visible, which may not be conducive to safe driving.

Hello, the specified distance for light detection is between 5 meters and 2 meters.

When will the high beam of the car be turned on?

1. When the car owner is driving on a wide road without traffic, he can turn on the high beam. When driving at night, if you encounter the opposite vehicle using the high beam, you can turn on the high beam once or twice to remind the other party to switch to the low beam, so as not to cause adverse effects on driving. When driving on the highway at night, you can use the high beam of the vehicle.

2. You can turn on the high beam in the following cases: no street lighting or poorly lit roads: high beams can be used.

3. The use of high beams is generally by dialing forward or inward, dialing forward, and turning on the high beam all the time;Dial inward, and the high and lom beams flash.

How to turn on the high beam of the car

1. The high beam of the car can be turned on through the light lever switch. First, turn the light switch to the low beam and then pull the lever to adjust the low beam to high beam. The specific steps are: find the light lever-type regulation switch of the car and pay attention to the various icons marked on it.

2. (1) The left joystick is turned in the direction of the driver, and the high beam is turned on. After the hand is released, the joystick is automatically reset and the high beam is turned off. This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

3. There are several ways to turn on the high beam: turn the left joystick towards the driver, turn on the high beam, automatically reset the joystick after release, and turn off the high beam.This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

4. The way to turn on the high beam and low beam is: high beam: push the light control lever forward; low beam: turn the light control switch on the left side of the steering wheel forward twice. The precautions for the use of car lights are: turn on the lom headlights when driving at night.

5. How to turn on the high beam of the car: find the high beam switch on the joystick on the left side of the steering wheel or on the light knob on the left side of the steering wheel; turn on the low beam and press the joystick down (that is, the direction of the engine). At this time, the dashboard will display it, and the high beam can be turned on.