OKX download

The OKX downloadengine is one of the most core components of the car, which plays an important role in determining the operating performance of the vehicle. Due to long-term use, carbon scale may occur inside the engine, which will not only affect the normal operation of the engine, but also make the car underpowered, increase fuel consumption, and even cause serious failures. Therefore, carbon clearing has become one of the important links to ensure the performance of automobiles.I. Why carbon scale is produced. In daily driving, the impurities contained in the exhaust gas and fuel emitted by the car will be attached to the engine, and these impurities gradually change to produce carbon scale. In addition, long-term use of poor oil quality or low-quality fuel will also increase the possibility of carbonisation. The generation of carbon scale will lead to the blockage of the internal airway and oil pipeline of the engine, making it difficult for fuel and gas to flow, thus reducing the efficiency of the engine and making the car prone to shaking, lack of power and other phenomena. II. How to clean up carbon There are many ways to clear up carbon on the market, the most common of which include mechanical cleaning and chemical cleaning. The following are the characteristics of these two methods respectively. 1. Mechanical cleaning Mechanical cleaning refers to the removal of carbon scale through detergents or cleaning devices under the condition of ensuring that the engine is not damaged.According to the different cleaning methods, it can be divided into static cleaning and dynamic cleaning. Static cleaning: The engine does not start. By moving the piston and swinging the connecting rod, the cleaning liquid circulates inside the cylinder to achieve the cleaning effect. Dynamic cleaning: In the medium and low speed state, the engine uses a certain amount of cleaning agent and is transported to the interior of the engine through high-density water mist jet, which is used to clean the intake valve, cylinder, valve seat and other parts. Two. Chemical cleaning refers to the use of chemical hydrolyses to change the chemical condition of carbon scale inside the engine, so that it begins to soften, and then gradually remove it while the engine is rotated at high speed. This method does not require disassembly and installation of the engine, so it is fast and effective, and can remove deeper scale. However, it should be reminded that safety should be paid to safety when removing carbon scale, especially to avoid fire, explosion and other dangers caused by misoperation.In addition, in order to maintain a good cleaning effect, it is necessary to clean regularly and choose the cleaning method suitable for your car model. III. The advantages of clearing carbon by cleaning the carbon scale generated inside the engine, the following advantages can be achieved: 1. Improve power performance: The deposition of carbon will block the passage of the engine cylinder or oil line, so that the power performance of the vehicle is greatly reduced, and the power performance can be improved after cleaning. Two. Reduce fuel consumption: Carbon deposition will block the fuel supply pipeline, increasing the fuel consumption of the vehicle. After cleaning the engine, the fuel consumption cost can be significantly reduced. 3. Extend engine life: Long-term use produces a large amount of carbon scale, which will affect the service life of the car engine. Cleaning the interior of the vehicle can extend the service life of the engine and reduce the occurrence of failures. Four. Improve environmental protection performance: Cleaning the carbon scale inside the engine can effectively reduce the exhaust emissions of automobile exhaust, thus having a smaller impact on the environment. IV. Precautions 1. Choose the appropriate cleaning agent and equipment. When cleaning up engine carbon by yourself, it is very important to choose detergents and cleaning equipment suitable for your car model. Misselection or misoperation may cause serious problems with the engine. Two. Pay attention to safety when cleaning up. Carbon cleaning is very dangerous, which is easy to cause problems such as spontaneous combustion and explosion of vehicles. Therefore, it should be cleaned up under the guidance of professionals. 3. You need to pay attention to maintenance after cleaning. After cleaning the engine, it is necessary to replace the high-quality oil and filter element, and ensure the next maintenance. After a period of driving, the car needs to be maintained for a second time so that the engine can be better protected and maintained.In a word, carbon clearing is the key to ensuring the performance and service life of automobiles. Whether it is mechanical or chemical cleaning, it has its own unique advantages and scope of application. Before cleaning, be sure to choose the right equipment and detergent, and pay attention to safety and maintenance. Only in this way can we effectively optimize the power of the car and enjoy the driving pleasure better.

Contact Us
Phone：020-83484638