Hello, it means that the automatic start-stop function is turned off. If you need to turn it on, just press the start-stop function switch again. I hope I can help you. I wish you a happy use of the car [If there is a problem with the car, please ask the car master. 4S store professional technician, 10 minutes to solve.
This means that the intelligent start-stop system of this car is turned off, that is, the engine will not turn off when you wait for the red light.
After the car starts, just press the start-stop button, and the dashboard message bar shows "the start-stop system is turned on". Press it again to turn it off, and it shows "The start-stop system is turned off".
The reason why the start-stop function of Yadi f3 is invalid: battery failure;Vacuum booster failure; vacuum pressure sensor failure; start-stop system related line failure.
Hello, this is caused by the additional installation of navigation. The original car multimedia has an anti-disassembly function. The later added navigation may cause the car to not be installed or the instrument prompts that the car cannot be started after a few hours. Just find an electrical repairman to add the original car multimedia board to the navigation. I hope my answer can help you. [ For car questions, ask the car master.
The reasons why BYD f3 cannot start: the use of poor-quality fuel; battery power loss; start-up relay failure; spark plug problems, etc. An F3 (with start-stop system) model, the start-stop system works when the customer calls feedback and waits for traffic lights, and the ignition is automatically turned off. When starting again, the vehicle cannot start.
1. The electronic control unit (ECU) is the core of the engine electronic control system. It completes the acquisition of various parameters of the engine and the control of fuel injection volume and fuel injection timing, which determines the function of the entire electronic control system. Sensor Sensor (Sensor) transmits information about engine conditions and environment to the ECU instantly and truthfully through various signals.
2. The engine electronic control system is a system with the MT20U2 engine control module as the core. It is characterized by computer closed-loop control, multi-point fuel sequential injection, direct ignition without distributor grouping and ternary catalyst post-processing. It has all the technical specifications required to meet the current national 3 regulations.
3. Delphi system.The 2019 BYD f3 adopts Delphi's latest version of the electric injection management system, and the ignition coil ignites independently in each cylinder, making the same displacement power higher and more fuel-efficient.
4. The BYD F3 sedan adopts the Japanese Mitsubishi DA4C18 1.6L engine, which is equipped with the Delphi MTZOU engine management system. Figure l shows the installation position of the main parts of the engine electronic control system on the car, and Figure 2 shows the circuit of the engine electronic control system.
1. BYD f3 one-click start: press the start button, after the ACC light turns on, press the start button again. At this time, the one-click start button turns green, and the vehicle is self-checked;When the vehicle completes the self-inspection, step on the brake, press the one-button start button again, and then the vehicle starts.
2. Under the conditions of using the start-stop system, after the vehicle stops, switch the current gear to the idle state and release the clutch pedal. The engine will automatically turn off, and the combination instrument will turn on the effective indicator light of the stop system. Step on the clutch pedal again, the engine will start automatically, and the combination instrument will turn off the effective indicator light of the start-stop system.
3. BYD Speedy starts and stops without special operation. After turning on, it runs automatically and is controlled by the driving computer. The BYD Speedy start-stop function display light is on the left side of the engine start button, and the light indicates that this function is turned off. The default is that the light is not on. The function is turned on.
1. Now most of the reversing images are not punched in the rear bar, but are integrated on the license plate light, and a probe comes out from under the license plate light. When buying a probe, you should pay attention to it if it is suitable for your vehicle. After buying back the probe, we can remove the license plate lamp and then install it.
2. First, enter the reversing state and start the reversing image system. After the reversing image picture appears on the display, press the setting button to enter the setting menu.
3. First, turn the ignition switch to "on", and then put the gear position in reverse. At this time, the image of the reversing camera will be automatically displayed on the multimedia interface (MMI) display, which means that the reversing image system has been activated.
4. The specific steps are as follows: call up the auxiliary line settings in the multimedia navigation. Please note that this operation can be carried out when the engine is off. Click "Voice" 6 times in a row, which will pop up the reversing line adjustment interface. In the interface, click left to adjust, and a small square adjustment tool will appear.
First, turn off the air conditioning system and disconnect the power supply.Then, check the sensor connection and solve any connection problems. If the sensor needs to be replaced, remove it and replace it with a new sensor. Make sure to restart the air conditioning system after connecting the new sensor.
Turn off the air conditioner and turn it back on after a few minutes. Sometimes restarting can solve temporary sensor problems. Check whether the indoor temperature sensor of the air conditioner is blocked or damaged. Clean the sensor and make sure it is not covered.
Check the sensor connection: Make sure that the temperature sensor is firmly connected and there is no loose or damaged line connection. If you find any problems, try to reconnect or replace the sensor. Restart the air conditioning system: Sometimes, the fault code may be a temporary error.
Binance APK-APP, download it now, new users will receive a novice gift pack.
Hello, it means that the automatic start-stop function is turned off. If you need to turn it on, just press the start-stop function switch again. I hope I can help you. I wish you a happy use of the car [If there is a problem with the car, please ask the car master. 4S store professional technician, 10 minutes to solve.
This means that the intelligent start-stop system of this car is turned off, that is, the engine will not turn off when you wait for the red light.
After the car starts, just press the start-stop button, and the dashboard message bar shows "the start-stop system is turned on". Press it again to turn it off, and it shows "The start-stop system is turned off".
The reason why the start-stop function of Yadi f3 is invalid: battery failure;Vacuum booster failure; vacuum pressure sensor failure; start-stop system related line failure.
Hello, this is caused by the additional installation of navigation. The original car multimedia has an anti-disassembly function. The later added navigation may cause the car to not be installed or the instrument prompts that the car cannot be started after a few hours. Just find an electrical repairman to add the original car multimedia board to the navigation. I hope my answer can help you. [ For car questions, ask the car master.
The reasons why BYD f3 cannot start: the use of poor-quality fuel; battery power loss; start-up relay failure; spark plug problems, etc. An F3 (with start-stop system) model, the start-stop system works when the customer calls feedback and waits for traffic lights, and the ignition is automatically turned off. When starting again, the vehicle cannot start.
1. The electronic control unit (ECU) is the core of the engine electronic control system. It completes the acquisition of various parameters of the engine and the control of fuel injection volume and fuel injection timing, which determines the function of the entire electronic control system. Sensor Sensor (Sensor) transmits information about engine conditions and environment to the ECU instantly and truthfully through various signals.
2. The engine electronic control system is a system with the MT20U2 engine control module as the core. It is characterized by computer closed-loop control, multi-point fuel sequential injection, direct ignition without distributor grouping and ternary catalyst post-processing. It has all the technical specifications required to meet the current national 3 regulations.
3. Delphi system.The 2019 BYD f3 adopts Delphi's latest version of the electric injection management system, and the ignition coil ignites independently in each cylinder, making the same displacement power higher and more fuel-efficient.
4. The BYD F3 sedan adopts the Japanese Mitsubishi DA4C18 1.6L engine, which is equipped with the Delphi MTZOU engine management system. Figure l shows the installation position of the main parts of the engine electronic control system on the car, and Figure 2 shows the circuit of the engine electronic control system.
1. BYD f3 one-click start: press the start button, after the ACC light turns on, press the start button again. At this time, the one-click start button turns green, and the vehicle is self-checked;When the vehicle completes the self-inspection, step on the brake, press the one-button start button again, and then the vehicle starts.
2. Under the conditions of using the start-stop system, after the vehicle stops, switch the current gear to the idle state and release the clutch pedal. The engine will automatically turn off, and the combination instrument will turn on the effective indicator light of the stop system. Step on the clutch pedal again, the engine will start automatically, and the combination instrument will turn off the effective indicator light of the start-stop system.
3. BYD Speedy starts and stops without special operation. After turning on, it runs automatically and is controlled by the driving computer. The BYD Speedy start-stop function display light is on the left side of the engine start button, and the light indicates that this function is turned off. The default is that the light is not on. The function is turned on.
1. Now most of the reversing images are not punched in the rear bar, but are integrated on the license plate light, and a probe comes out from under the license plate light. When buying a probe, you should pay attention to it if it is suitable for your vehicle. After buying back the probe, we can remove the license plate lamp and then install it.
2. First, enter the reversing state and start the reversing image system. After the reversing image picture appears on the display, press the setting button to enter the setting menu.
3. First, turn the ignition switch to "on", and then put the gear position in reverse. At this time, the image of the reversing camera will be automatically displayed on the multimedia interface (MMI) display, which means that the reversing image system has been activated.
4. The specific steps are as follows: call up the auxiliary line settings in the multimedia navigation. Please note that this operation can be carried out when the engine is off. Click "Voice" 6 times in a row, which will pop up the reversing line adjustment interface. In the interface, click left to adjust, and a small square adjustment tool will appear.
First, turn off the air conditioning system and disconnect the power supply.Then, check the sensor connection and solve any connection problems. If the sensor needs to be replaced, remove it and replace it with a new sensor. Make sure to restart the air conditioning system after connecting the new sensor.
Turn off the air conditioner and turn it back on after a few minutes. Sometimes restarting can solve temporary sensor problems. Check whether the indoor temperature sensor of the air conditioner is blocked or damaged. Clean the sensor and make sure it is not covered.
Check the sensor connection: Make sure that the temperature sensor is firmly connected and there is no loose or damaged line connection. If you find any problems, try to reconnect or replace the sensor. Restart the air conditioning system: Sometimes, the fault code may be a temporary error.
OKX Wallet app download for Android
author: 2025-01-10 17:27186.83MB
Check982.38MB
Check166.17MB
Check654.16MB
Check236.73MB
Check429.35MB
Check792.66MB
Check328.39MB
Check243.99MB
Check285.14MB
Check888.97MB
Check753.18MB
Check527.41MB
Check567.23MB
Check751.43MB
Check165.54MB
Check653.44MB
Check678.66MB
Check217.63MB
Check679.65MB
Check459.16MB
Check884.67MB
Check369.35MB
Check654.76MB
Check446.11MB
Check796.76MB
Check717.43MB
Check571.93MB
Check257.82MB
Check527.14MB
Check183.75MB
Check359.86MB
Check678.99MB
Check975.42MB
Check968.12MB
Check268.34MB
CheckScan to install
Binance APK to discover more
Netizen comments More
931 澹泊寡欲网
2025-01-10 17:53 recommend
429 眷红偎翠网
2025-01-10 17:22 recommend
2698 神憎鬼厌网
2025-01-10 16:42 recommend
554 不蔓不枝网
2025-01-10 16:19 recommend
2038 替古人担忧网
2025-01-10 15:53 recommend