The specific analysis is as follows; sensor problems; the sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, poor contact or the signal is interrupted, the ECU of the car cannot accurately obtain the engine data. At this time It will cause the engine fault light to light up.
The problem of oil, it is necessary to choose the appropriate oil and gasoline according to the characteristics of the engine. There is a problem with the sensor of the vehicle, causing the fault light to turn on. Problems with spark plugs or lines will lead to insufficient combustion of the engine mixture. Maintenance problems, or too much carbon accumulation will also cause insufficient combustion.
The reason why the engine fault light is on is that the plug of the sensor is loose. When the engine fault light is on, we can restart it.Move the vehicle or lightly test the joints of each wiring harness to check whether the fault light will turn off. In some cases, the fault light of the engine is on because the plug of the wiring harness is loose.
Mainly because the oxygen sensor, water temperature sensor, crankshaft position sensor and air flow sensor are damaged, or when the contact is poor, the driving computer of the car cannot obtain the relevant data of the engine, resulting in the engine fault light.
1. Oil level indicator light When the indicator light is too low, it means that the engine system oil level is too low and needs to be replenished in time. If it reaches the kilometer of replacing the oil, the replacement finger If the indicator light is still on, it needs to be reset.
2. EV indicator light: The EV indicator light is only on when the traction motor is used to drive the vehicle or the gasoline engine stops. EV drive mode indicator light: the surface vehicle is in EV drive mode. The yellow light indicates that there is a fault, and this fault can be used for a short time. It is recommended to go to the 4S store or repair shop for inspection as soon as possible.
3. The car fault indicator light is as follows: coolant warning light, which indicates that the coolant temperature is too high. If the temperature is too high, the cylinder head will be deformed or even the cylinder will be pulled, which is a very serious situation. The coping method is to turn off the engine, wait for the temperature to drop or check the coolant.
In this case, you can continue to drive temporarily, but for safety's sake, it's best to drive slowly at low and medium speed first, and then go to the nearby repair shop for inspection immediately. The engine fault sign is on and can't work.
After the fault indicator light goes out, there is no problem. If the light is still on, read the fault code and repair the car according to the detected fault information.The fault light of the car engine is on and can't be started. There are three reasons for the failure: carbon accumulation, the reason why the acceleration of the car disappears.
If the engine fault light is on, it can't continue to open. The biggest possibility of the engine fault light is that there is a problem with the fuel emission system, and the most prone to problems in the emission system is the oxygen sensor.
Whether the engine fault light of Pacific Automobile Network can continue to be turned on depends on the specific situation. If the yellow engine fault light is on, you can continue to drive under the condition that the vehicle is running normally, but you need to drive the vehicle to the maintenance agency for processing as soon as possible. If the red engine fault light is on , should be immediately under the premise of safety.
The engine fault light is on. Can I continue to exercise? The answer is correct. The engine fault indicator light is on, indicating that your vehicle has broken down.If you are driving, there is no need to panic. Observe whether the indication of the water thermometer is normal and try to feel the operation of the engine.
If the engine fault light is on, there is no abnormal sound in the cabin, there are no other abnormal prompts on the instrument, the vehicle power is not affected, and the gearbox upshift is not affected, you can continue to drive to the repair shop for further investigation.
Binance download-APP, download it now, new users will receive a novice gift pack.
The specific analysis is as follows; sensor problems; the sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, poor contact or the signal is interrupted, the ECU of the car cannot accurately obtain the engine data. At this time It will cause the engine fault light to light up.
The problem of oil, it is necessary to choose the appropriate oil and gasoline according to the characteristics of the engine. There is a problem with the sensor of the vehicle, causing the fault light to turn on. Problems with spark plugs or lines will lead to insufficient combustion of the engine mixture. Maintenance problems, or too much carbon accumulation will also cause insufficient combustion.
The reason why the engine fault light is on is that the plug of the sensor is loose. When the engine fault light is on, we can restart it.Move the vehicle or lightly test the joints of each wiring harness to check whether the fault light will turn off. In some cases, the fault light of the engine is on because the plug of the wiring harness is loose.
Mainly because the oxygen sensor, water temperature sensor, crankshaft position sensor and air flow sensor are damaged, or when the contact is poor, the driving computer of the car cannot obtain the relevant data of the engine, resulting in the engine fault light.
1. Oil level indicator light When the indicator light is too low, it means that the engine system oil level is too low and needs to be replenished in time. If it reaches the kilometer of replacing the oil, the replacement finger If the indicator light is still on, it needs to be reset.
2. EV indicator light: The EV indicator light is only on when the traction motor is used to drive the vehicle or the gasoline engine stops. EV drive mode indicator light: the surface vehicle is in EV drive mode. The yellow light indicates that there is a fault, and this fault can be used for a short time. It is recommended to go to the 4S store or repair shop for inspection as soon as possible.
3. The car fault indicator light is as follows: coolant warning light, which indicates that the coolant temperature is too high. If the temperature is too high, the cylinder head will be deformed or even the cylinder will be pulled, which is a very serious situation. The coping method is to turn off the engine, wait for the temperature to drop or check the coolant.
In this case, you can continue to drive temporarily, but for safety's sake, it's best to drive slowly at low and medium speed first, and then go to the nearby repair shop for inspection immediately. The engine fault sign is on and can't work.
After the fault indicator light goes out, there is no problem. If the light is still on, read the fault code and repair the car according to the detected fault information.The fault light of the car engine is on and can't be started. There are three reasons for the failure: carbon accumulation, the reason why the acceleration of the car disappears.
If the engine fault light is on, it can't continue to open. The biggest possibility of the engine fault light is that there is a problem with the fuel emission system, and the most prone to problems in the emission system is the oxygen sensor.
Whether the engine fault light of Pacific Automobile Network can continue to be turned on depends on the specific situation. If the yellow engine fault light is on, you can continue to drive under the condition that the vehicle is running normally, but you need to drive the vehicle to the maintenance agency for processing as soon as possible. If the red engine fault light is on , should be immediately under the premise of safety.
The engine fault light is on. Can I continue to exercise? The answer is correct. The engine fault indicator light is on, indicating that your vehicle has broken down.If you are driving, there is no need to panic. Observe whether the indication of the water thermometer is normal and try to feel the operation of the engine.
If the engine fault light is on, there is no abnormal sound in the cabin, there are no other abnormal prompts on the instrument, the vehicle power is not affected, and the gearbox upshift is not affected, you can continue to drive to the repair shop for further investigation.
Binance app download Play Store
author: 2025-01-10 10:35948.59MB
Check821.49MB
Check768.12MB
Check138.75MB
Check886.21MB
Check451.83MB
Check271.96MB
Check836.14MB
Check224.14MB
Check287.23MB
Check841.53MB
Check914.54MB
Check898.45MB
Check524.12MB
Check256.18MB
Check584.55MB
Check168.81MB
Check528.62MB
Check827.44MB
Check497.57MB
Check278.77MB
Check379.61MB
Check412.24MB
Check476.15MB
Check649.19MB
Check168.93MB
Check358.79MB
Check812.64MB
Check558.47MB
Check788.38MB
Check774.46MB
Check327.49MB
Check746.29MB
Check777.21MB
Check514.22MB
Check117.35MB
CheckScan to install
Binance download to discover more
Netizen comments More
1291 愁肠九回网
2025-01-10 13:06 recommend
874 摆袖却金网
2025-01-10 13:05 recommend
595 菜蔬之色网
2025-01-10 11:50 recommend
1769 冻浦鱼惊网
2025-01-10 11:27 recommend
2843 默默无言网
2025-01-10 11:23 recommend