OKX Wallet Sign up

List of contents of this article:

• 1, Minimum requirements for hardware of win10,64-bit installation system
• 2, How to repair the system win10
• 3、how to restore the system
• 4,OKX Wallet Sign up How to prevent win10 from automatically updating the system
• 5, How to install win10 steps in computer system
• 6, win10 how to check whether the system is activated

win10, the minimum hardware requirements of the 64-bit installation system Requirements

1. Installing the Windows 10 64-bit operating system needs to meet the following minimum configuration requirements: Processor: 64-bit processor with at least 1 GHz or higher speed. Memory: at least 2 GB of RAM. Hard disk space: at least 20 GB of available hard disk space.

2. The minimum configuration requirement of win10 system is 1G memory for 32-bit system and 2G memory for 64-bit system, but inDuring the actual installation process, the online upgrade must be 2G memory, and 1G memory cannot be upgraded. 1G memory can be installed through the USB flash drive. Generally, it is recommended to install a 32-bit system with 2G memory, and a 64-bit system with more than 4G memory.

3. win10 system 64-bit minimum hardware configuration processor (CPU): 1GHz or faster processor or SoC; memory stick (RAM): 2GB (64-bit); available hard disk space: 20GB (64-bit); graphics card: DirectX 9 or more High version (including WDDM0 driver); display: the resolution is at least 800x600.

How to repair the system win10

1. Method 1: win10 comes with its own repair tool win10RE function. win10RE can restore, repair and other functions of the system. And you can restore the computer without damaging the files, or delete all the data and initialize the system. 3 ways to start win10RE: hold down shift and select restart.

2. 3 ways to start win10RE: press and hold shift and select "Restart".Another way is to press F8 a few more times when turning on the power. When the system cannot start, the "Recovery Interface" will pop up. Select "View Advanced Repair Options" to enter.

3. Plug the system disk into the computer, and then click and install it. Use the system disk to reinstall or boot directly with the Windows 10 system disk (USB flash drive or CD-ROM). After the installation interface appears, click "Next", and then in the installation interface, click the "Repair Computer" option at the bottom left to repair and install.

4. If there is a problem with your Windows 10 computer, you may need to repair the system to solve the problem. Here are some feasible methods. Restart the computer. Sometimes, the computer only needs to be restarted to solve the problem. Click WindowIn the s menu, select Restart, wait for the computer to restart, and then check whether the problem has been solved.

5. How to start repair Win10? Use the Windows installation disk or boot USB disk. If the hard disk data is accidentally lost during operation, it is recommended to use [Hi Format Data Recovery Master] for data recovery operation. The specific operation steps are as follows: download and install professional data recovery software, such as "Hi Format Data Recovery Master".

How to restore the system in windows10

Search Create a restore point from the taskbar and select it from the search results list. In the "System Protection" tab, select "Create". Enter the description of the restore point, and then select "Create" and "OK" in turn.

Click "System Restore" in the "System Protection" interface. Click Next in the pop-up system restore prompt window. Click to show more restore points, and you can also see the restore points automatically created by the system after the update.

I: Restore the system 1 First, we need to open the computer to enter the desktop, and then find the control panel icon and click to open. Or we can hold down the WINDOWS icon key and the r key on the keyboard, open the running window, enter control in the window, and then click OK to open the control panel.

Back up important data (optional): Before restoring the system, it is recommended to back up important files and data to prevent loss. Files can be copied to external hard disks, USB drives or cloud storage services.Use system restore: Windows 10 provides a built-in restore function to restore the system to its previous state.

Win10 system restore operation steps are as follows 1 Click "This Computer" and right-click to select "Properties" 2 After opening the interface, click "Advanced System Settings" on the left 3 Select "System Protection" "System Restore" 4 Click "Select Another Restore Point", click "Next" 5 Select a slightly Earlier than before the error report.

How to prevent win10 from automatically updating the system

Method 2: Limit the upload and download traffic of updates If you think this method is too much to move the whole body, in fact, there is another Another function, it can limit the upload and download traffic of Windows update services. The positioning is very accurate, that is, to prevent the update service from occupying too much traffic and slowing down the Internet experience of others around.

For Windows 10 Professional and later operating systems, the update function of the Windows 10 system can be controlled through the group policy editor. Then first press the Windows logo key + R key, open the run window command, and enter " Gpedit.msc".

Right-click [This Computer] - Select [Management] 2, Select [Services and Applications] - Double-click to open [Service] 3, select [Windows Update] 4, right-click [Properties] - Select [Prohibited] - "Service Status Selection" in the [General] tab "Startup Type" [Stop].

How to install win10 steps in the computer system

1. Reinstall the system win10 First, insert the system USB flash drive into the computer to be installed. After turning on the computer, press the delete key on the keyboard until the picture of the motherboard BIOS is displayed on the screen. Then modify the startup item, drag the USB flash drive at the beginning of UEFI to the first line, save and restart the computer directly.

2. Method/Steps: First, install the system home one-click reinstall system tool on the computer by yourself, and then open it to select the win10 system and click to install. Wait for the software to download the win10 image by itself and deploy the environment. Restart the computer after completion. Come to the boot option interface and select the second xiaobai-pe system to enter the pe system.

3. Step 1: We can confirm whether to keep the files, settings and programs of our current version of Windows according to our needs in the upgrade option. Step 2: First, turn on the computer to run Windows. ( If you want to upgrade, you can't start or boot the computer from the Windows 7 installation media.

4. The new "cloud reinstall" function since the Win 10 2004 version makes the reinstalled system no longer need a USB flash drive, but directly download and reinstall Win 10 in the cloud. Enter [Start] [Settings] [Update and Security] [Restore] in turn, and click [Start] under "Reset This Computer".

wiHow to check whether the system is activated in n10

The method of checking the activation status of Win10 is as follows: open the computer that needs to check whether the system is activated, and then find the computer icon on the computer desktop. Then right-click on the icon and select Properties at the bottom of the pop-up page. Enter the control panel system interface.

First of all, right-click on the computer desktop and select the "Display Settings" option in the pop-up menu. 2. Then in the pop-up window, click the "About" option at the end of the left menu bar.

Method 1: On the Windows 10 system desktop, right-click the computer icon on the desktop and select the property menu item in the pop-up menu. At this time, the properties window of Windows 10 will open, in which you can see whether the current system is activated or not.

Method 1 If you want to check whether the Windows 10 system is activated, it is very simple. You just need to right-click the "This Computer" icon on the Windows 10 desktop, and then select the "Properties" menu item in the pop-up menu.

Right-click the "Windows" button in the lower left corner of the desktop and select "Control Panel" from the pop-up right-click menu. From the open "Control Panel" interface, enter "System and Security" - "System" in turn. In the new window opened, you can check the activation status of the current Win10 official enterprise version system.