1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
OKX download-APP, download it now, new users will receive a novice gift pack.
1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
662.19MB
Check554.93MB
Check251.18MB
Check357.67MB
Check766.96MB
Check867.32MB
Check474.13MB
Check719.83MB
Check875.14MB
Check165.94MB
Check577.62MB
Check867.57MB
Check384.24MB
Check494.43MB
Check565.77MB
Check425.59MB
Check876.89MB
Check231.27MB
Check732.45MB
Check975.41MB
Check168.93MB
Check328.88MB
Check646.46MB
Check991.19MB
Check189.48MB
Check953.25MB
Check525.61MB
Check151.55MB
Check318.24MB
Check826.33MB
Check523.78MB
Check916.88MB
Check777.38MB
Check933.73MB
Check689.99MB
Check572.21MB
CheckScan to install
OKX download to discover more
Netizen comments More
1336 铿金霏玉网
2025-01-10 17:33 recommend
2611 七舌八嘴网
2025-01-10 17:31 recommend
2976 大有作为网
2025-01-10 16:44 recommend
2648 停云落月网
2025-01-10 16:43 recommend
239 不知端倪网
2025-01-10 15:40 recommend