The gas of Yuchai 460 natural gas engine is caused by the following reasons. JH6 natural gas 460 clutch slippage. The clutch slippage is mainly manifested as when the car accelerates while driving, the speed cannot increase with the increase of the engine speed, and the power of the engine cannot be completely transmitted to the drive wheel, resulting in driving weakness, especially when going uphill.
The reasons and treatment methods of large engine exhaust gas are as follows: insufficient combustion of the engine or mechanical failure of the engine. For example, the cylinder liner piston is severely worn, the gap between the cylinder and the piston is too large, etc. If the exhaust gas is abnormally large.
The engine consumes too much fuel, because the coolant temperature sensor is abnormal. The air flow meter or intake pressure sensor is abnormal.The throttlute position sensor is abnormal. The fuel pressure is too high. Cold start injector leaks oil or cold start control abnormality. The fuel injector is leaking. The oxygen sensor failed.
The increase in engine fuel consumption is mostly due to the fault of the spark plug. The function of the spark plug is to introduce high-voltage electricity into the cylinder, ignite the combustible mixture, and the combustion work to drive the engine to continue to rotate. It can be said that the spark plug is the pacemaker of the engine.
1. Secondary combustion to prevent atmospheric pollution. If there is not much gas in the cylinder, you will feel the suction when the oil cap is opened. This is a normal image.
2. Don't use the standards of real Santana to measure it.There are only four models of the real Santana series: Pusan, Santana 2000, Santana 3000 and Santana Zhijun. No matter which model, the length of the car is between 4670 and 4687 mm, which is luxurious and elegant.
3. If it has just been cleaned and has not been cleaned for a long time. After cleaning, the disappearance of the stains at the position of your throttle valve gap will lead to a larger air intake. High idling speed is normal. After driving for a day or two, it will return to normal, and the computer will automatically learn back to normal idling speed.
What to do with Volkswagen Jetta engine oil leakage? Volkswagen Jetta engine oil leakage is mostly related to the aging of oil seals and sealing rings, such as the aging of the front and rear oil seals of the crankshaft, the oil pan shell seal, the valve chamber seal, etc. In this case, the rubber seal needs to be replaced. Engine oil leakage will cause engine wear due to lack of oil. Check the dew point and repair it in time.
The engine has a large amount of air, the piston ring is seriously worn or the exhaust valve is damaged. In this case, you need to check the above two reasons. If your vehicle has not driven many kilometers, it is very likely that the exhaust valve is damaged.Thank you for adopting it.
There are many reasons for car oil leakage, which may be due to gaskets, oil leakage, poor cylinder block sealing, too large piston ring gap, resulting in oil burning, etc.
Hello, I'm going to the repair shop to replace the air intake branch pipe gasket. [ If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.
The excavator is weak, lacks oil, the engine exhaust is large and the engine oil is also injected outward. Speaking of this, everyone may know that this is an engine problem. The lower exhaust caused by the wear between the engine piston and the cylinder arm is large and the engine oil injection phenomenon.
OKX Wallet Sign up-APP, download it now, new users will receive a novice gift pack.
The gas of Yuchai 460 natural gas engine is caused by the following reasons. JH6 natural gas 460 clutch slippage. The clutch slippage is mainly manifested as when the car accelerates while driving, the speed cannot increase with the increase of the engine speed, and the power of the engine cannot be completely transmitted to the drive wheel, resulting in driving weakness, especially when going uphill.
The reasons and treatment methods of large engine exhaust gas are as follows: insufficient combustion of the engine or mechanical failure of the engine. For example, the cylinder liner piston is severely worn, the gap between the cylinder and the piston is too large, etc. If the exhaust gas is abnormally large.
The engine consumes too much fuel, because the coolant temperature sensor is abnormal. The air flow meter or intake pressure sensor is abnormal.The throttlute position sensor is abnormal. The fuel pressure is too high. Cold start injector leaks oil or cold start control abnormality. The fuel injector is leaking. The oxygen sensor failed.
The increase in engine fuel consumption is mostly due to the fault of the spark plug. The function of the spark plug is to introduce high-voltage electricity into the cylinder, ignite the combustible mixture, and the combustion work to drive the engine to continue to rotate. It can be said that the spark plug is the pacemaker of the engine.
1. Secondary combustion to prevent atmospheric pollution. If there is not much gas in the cylinder, you will feel the suction when the oil cap is opened. This is a normal image.
2. Don't use the standards of real Santana to measure it.There are only four models of the real Santana series: Pusan, Santana 2000, Santana 3000 and Santana Zhijun. No matter which model, the length of the car is between 4670 and 4687 mm, which is luxurious and elegant.
3. If it has just been cleaned and has not been cleaned for a long time. After cleaning, the disappearance of the stains at the position of your throttle valve gap will lead to a larger air intake. High idling speed is normal. After driving for a day or two, it will return to normal, and the computer will automatically learn back to normal idling speed.
What to do with Volkswagen Jetta engine oil leakage? Volkswagen Jetta engine oil leakage is mostly related to the aging of oil seals and sealing rings, such as the aging of the front and rear oil seals of the crankshaft, the oil pan shell seal, the valve chamber seal, etc. In this case, the rubber seal needs to be replaced. Engine oil leakage will cause engine wear due to lack of oil. Check the dew point and repair it in time.
The engine has a large amount of air, the piston ring is seriously worn or the exhaust valve is damaged. In this case, you need to check the above two reasons. If your vehicle has not driven many kilometers, it is very likely that the exhaust valve is damaged.Thank you for adopting it.
There are many reasons for car oil leakage, which may be due to gaskets, oil leakage, poor cylinder block sealing, too large piston ring gap, resulting in oil burning, etc.
Hello, I'm going to the repair shop to replace the air intake branch pipe gasket. [ If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.
The excavator is weak, lacks oil, the engine exhaust is large and the engine oil is also injected outward. Speaking of this, everyone may know that this is an engine problem. The lower exhaust caused by the wear between the engine piston and the cylinder arm is large and the engine oil injection phenomenon.
269.44MB
Check645.47MB
Check343.64MB
Check324.68MB
Check662.71MB
Check139.11MB
Check446.19MB
Check885.78MB
Check275.38MB
Check317.14MB
Check282.19MB
Check674.21MB
Check796.16MB
Check522.57MB
Check317.38MB
Check875.26MB
Check571.78MB
Check936.59MB
Check339.84MB
Check252.49MB
Check699.25MB
Check394.36MB
Check786.34MB
Check387.22MB
Check456.39MB
Check637.85MB
Check414.13MB
Check259.14MB
Check175.64MB
Check196.93MB
Check972.12MB
Check731.66MB
Check164.37MB
Check184.49MB
Check388.11MB
Check345.46MB
CheckScan to install
OKX Wallet Sign up to discover more
Netizen comments More
1121 直言正论网
2025-01-10 18:13 recommend
1306 心浮气躁网
2025-01-10 17:48 recommend
1710 解甲投戈网
2025-01-10 17:02 recommend
1271 重三叠四网
2025-01-10 16:45 recommend
2556 言之有序网
2025-01-10 15:43 recommend