OKX Wallet login

List of contents of this article:

• 1、What is the car cleaning process
• 2, What are the two main categories of car cleaning?
• 3, How many methods are there for car cleaning?
• 4, Car interior cleaning and maintenance How to do it yourself
• 5, How to clean the car

What is the car cleaning process

1. The steps for car body cleaning are: close the doors and windows; rinse the car body with water; spray foam with a foam machine; wipe the body and tires with a soft towel; rinse the water twice. ; Use a squeegee to remove water droplets; use air to blow out the water in the cracks of the window; wipe the car body clean.

2. The main process of car cleaning can be divided into the following steps: whole car flushing; deep cleaning of wheel hubs and tires; cleaning of car body gaps; second flushing of the whole car; vacuuming in the car; wiping the interior and glass of the car; blowing water. Wash the whole car.

3. Squeeping The two technicians first scrape off the residual water on the car body with a special squeegee symmetrical operation. Inner room cleaning Change the inner room cleaning towel.Take out the ashtray, pour out the ash, and clean the ashtray.

4. The standard car washing steps are flushing, scrubbing, flushing and wiping. Rushing to the car. Before the vehicle enters the working room, A and B should take the initiative to move forward. One person should guide in front of the car, and the other should follow behind the car to remind the driver to turn and turn at the right time.

5. 5 basic steps of car cleaning. Usually, wash the car with clean water every 2-3 days. If it rains, you should wash your car once a day, or immediately when the weather is good. When the car body is dirty, wipe the whole car with detergent, and then rinse and dry it with water.

What are the two main categories of car cleaning?

1. General cleaning means that there is wax on the surface of the original car body and the effect of the wax is very good. It still has a certain protective effect on the car paint, and there is no need to remove it when washing the car. Therefore, this kind of car wash only washes away the dust, stains, etc. of the car body. The cleaning method is mainly carried out by using clean water and special detergents, and by manual or mechanical methods.

2. Car cleaning generally includes cleaning the car body, cleaningServices such as interior cleaning, engine compartment cleaning, wheel hub cleaning, body waxing and polishing, interior care and in-car sterilization. Car washing refers to the cleaning inside and outside the car, which is more meticulous and cleaner than traditional car washing.

3. Car wash liquid The main cleaning ingredients of car wash liquid are surfactants extracted from natural plants. In addition, car wash liquid generally adds natural car wax to naturally remove the electrostatic electricity of the car body. The car wash liquid is generally neutral and will not hurt the hands and the paint surface.

4. Multifunctional cleaning agent for body surface. This kind of cleaning agent is mainly used to clean the gray tips, oil stains, etc. on the surface of the car, and for paint care at the same time as cleaning. A. Two-in-one cleaning agent. The so-called "two-in-one" is the combination of cleaning and nursing, which has both cleaning function and waxing effect, which can meet the requirements of rapid cleaning and waxing.

How many methods are there for car cleaning?

Rinse the car body with a water pipe in order to wash away a little dust and sand. The order starts from the front and rear covers of the sunroof and the surrounding hubs, etc. Use a special car cleaning liquid to clean the sea surface of the car. The solution is to fully soak the car cleaning liquid and the sea surface where the car is cleaned, and then spray the car cleaning foam on the car.

Some water waxes can even protect against ultraviolet rays. Scratch-free car washing: Scratch-free car washing is a relatively professional car washing method. It is a new view of using the car washing method according to its characteristics according to the dirt on the surface of the car.

Scrubbing is made and supplied by B. If it can't be usedThe washing machine that automatically absorbs the car wash liquid is prepared manually. B should prepare the car wash liquid and prepare the scrubbing tools before the end of the previous process. Then the armor is evenly sprayed on the surface of the car body.

How to clean and maintain the car interior by yourself

1. Method 3: Clean the polyethylene interior and use glass cleaner on the polyethylene interior. Use baking soda on the polyethylene interior. Clean the interior seams with a toothbrush. Clean the foot mat. Method 4: You need to use a leather cleaning set to clean the leather interior leather seats. Turn on the hot air in the car. Pretreat the stubborn stains on the leather.

2. So how to maintain the interior of the car? Clean the seat. When the seat is not very dirty, you can use a combination of a long-haired brush and a suction vacuum cleaner to brush the seat surface.Use the suction inlet of the vacuum cleaner to suck out the dirt, which is very effective.

3. The following cleaning details. Before cleaning, prepare to turn off the car, turn off the instrument, lights and other electrical appliances, and clean up the irrelevant things. Tools and supplies: vacuum cleaner, large/small brush, small cotton swab, soft and clean rag, special car interior cleaner.

How to clean a car

Wash the car with water every 2-3 days. If it rains, you should wash your car once a day, or immediately when the weather is good. When the car body is dirty, wipe the whole car with detergent, and then rinse and dry it with water.

Car cleaning is divided into two parts, one is the exterior of the car and the other is the interior of the car.The complete car washing method is to spray detergent on the surface of the car, especially the gap next to the steel ring and the door. You can use the same detergent or different special detergents.

The whole car is washed. First of all, rinse the whole car thoroughly. Since it is the first rinse, it can be roughly cleaned like the usual car wash. Deep cleaning of wheel hubs and tires. Use a special hub cleaner to clean the hub with a brush. Be careful when cleaning, and clean the brush as deep as possible.

The operation process of car cleaning is: washing the whole car; deeply cleaning of the wheels and tires; cleaning the seams of the whole car; washing the whole car for the second time; vacuuming the interior of the car; wiping the interior and glass of the car; using an air gun to blow away the moisture in the cracks of the body cover.

Car cleaning is divided into two parts, one is internal cleaning and the other is external cleaning.