OKX Wallet to exchange

List of contents of this article:

• 1 , How to start and install the system with a USB disk
• 2、How to use the USB boot disk to install the system?
• 3, How to make a USB disk boot disk and install the system
• 4, u start the USB disk reinstallWhat are the complete steps to install the system
• 5, U disk installation system, detailed explanation of the steps

How to start the installation system with a USB disk

Insert the USB disk into the computer, restart and keep pressing Del or F2 or F1 or F10 or Esc and other keys enter the BIOS interface. Under the boot item selection menu interface, select the usb item and press the Enter key to enter the USB disk reinstallation page. Reinstalling the system can solve some problems caused by viruses and various system problems for unknown reasons.

The computer installation system can be installed with a USB disk. The specific installation steps are as follows: Make a USB disk boot disk, a USB disk boot disk, a ghost version system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.

Use the cabbage USB disk boot disk making tool to make a USB disk boot disk, download the genuine system mirror image or pure version mirror image, download the mirror file suffixed with ISO and copy it to the USB disk root directory. Press F2 to enter the BIOS settings when the BIOS settings are turned on.

The operation of one-click USB flash drive startup is very simple. When the USB flash drive is connected, press the shortcut boot key continuously after booting or restarting. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.

The steps are as follows: restart the computer, press the F2 key according to the prompts of the system screen when starting up (different computer BIOS versions may be different, you need to look at the prompt key of the power-on), press the arrow key to enter the BOOT menu, and set the first boot device to USB Storage De Vice.

How to use the USB boot disk to install the system?

1. After making the USB boot disk, the system cannot be installed directly. We also have to download a system in advance. The download is generally in ISO format and copied directly to the folder. If it is in GHO format, put it in the GHO folder.

2、. Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can OKX Wallet to exchangeask the boss to help make it into a system USB flash drive to omit the following steps), search and download boot USB flash drive making tools such as old hairy peach or cabbage on the Internet, insert the USB flash drive into the computer to run this software to make a boot USB flash drive.

3. Connect the USB flash drive to the computer, restart the computer, and press the USB flash drive startup shortcut key when the boot change screen appears until you enter the priority boot item setting interface. Select the USB flash drive, set it as the first startup item, and then press Enter.

4. If you made a backup when the installation of the system was completed in the past, you can use the backup to restore the system. If you don't make a backup, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps to restore the system.

5. Set the computer to start from the USB flash drive. Insert the USB flash drive into the computer that needs to install the operating system, and then restart the computer. At startup, press the button corresponding to the computer brand to enter the BIOS settings and set the computer to start from the USB flash drive. Install the operating system. After restarting the computer, the USB flash drive will automatically start the installer.

6. Insert the USB flash drive into the computer, restart and press Del or F2 or F1 or F10 or esc and other keys to enter the BIOS interface. Under the boot item selection menu interface, select the usb item and press the Enter key to enter the USB disk reinstallation page. Reinstalling the system can solve some problems caused by viruses and various system problems for unknown reasons.

How to make a USB disk boot disk and install the system

1. After making the USB disk boot disk, you can't install the system directly. We also have to download a system in advance. The download is generally in ISO format, directly Copy it into the folder. If it is in GHO format, put it in the GHO folder.

2. Enter the official website to download the U startup installation package;(2) Open the installation package, select the installation location on the D disk, and click to understand the installation; (3) After installation, insert a USB disk of about 8G, select the USB disk, and click to start production (the rest is fine to keep the default); (4) Select Yes, the USB disk boot disk is successfully produced.

3. Download and install Ultra ISO, and run it. Click the yellow file mark in the upper left corner to open the file and open the location of the mirror image we saved before. And plug in the USB flash drive on the computer and click [Open] to see [Start] - [Write to Hard Disk Image] After clicking, the write dialog box will appear.

4. Step 1: Preparation before production. Prepare a USB flash drive of more than 8G. Click the link to download the USB disk boot disk production tool: USB disk boot disk production tool. Step 2: Start making a USB boot disk. Download and install the installed version of the cabbage, open the software and insert the USB disk.

u What are the complete steps of the u boot u disk reinstall system

1. Prepare an 8GU disk, Baidu search and download the Xiaobai u disk boot disk production tool and Windows system mirror file, as follows As shown in the picture.

2. Make a USB boot disk. Make a USB boot disk with the cabbage USB boot disk making tool, and download the genuine system mirror image or pure version mirror image. Download the image file suffixed with ISO and copy it to the USB disk root directory. Press F2 to enter the BIOS settings when the BIOS settings are turned on.

3. Make a USB disk boot disk, download the u boot USB disk installation tool and install it;Connect the blank USB disk to the USB interface, and the USB disk is 8G and above; after the USB disk boot disk production tool reads the USB disk, click to start production, and then wait patiently for the USB disk boot disk production to be completed.

4. Insert the USB flash drive into the computer, restart and keep pressing Del or F2 or F1 or F10 or esc to enter the BIOS interface. Under the boot item selection menu interface, select the usb item and press the Enter key to enter the USB disk reinstallation page. Reinstalling the system can solve some problems caused by viruses and various system problems for unknown reasons.

USB disk installation system, detailed steps

Make a u boot disk with [u boot U disk boot disk making tool] to make a u boot u disk boot disk.

Make a USB disk boot disk. Use the cabbage USB disk boot disk making tool to make a USB disk boot disk, and download the genuine system image or pure version image. Download the image file suffixed with ISO and copy it to the root directory of the USB disk. Press F2 to enter the BIOS settings when the BIOS settings are turned on.

Restart the computer, press the F2 key according to the prompts of the system screen when starting up (different computer BIOS versions may be different, you need to look at the boot prompt key), press the arrow key to enter the BOOT menu, and set the first startup device to USB Storage Device.