1. Press the F2 key or DEL key to enter BI when the USB disk installation system is turned on.OS system, select USB HDD SanDisk Cruzer Edge, that is, you choose to boot from the USB flash drive. The next time you start it, you will automatically read the information from the USB flash drive for system installation.
2. Install the USB disk system, press the USB disk startup shortcut (FF2) when the computer is turned on, and then you can enter the USB disk installation tool, and then proceed to the installation process of the USB disk installation system. After the installation is completed, it will automatically restart and automatically enter the computer desktop.
3. After the setting is completed, press the F10 key to save, and then press the ESC key to exit. Restart the computer to enter the USB disk boot interface. USB disk is the abbreviation of USB disk, which is also called USB disk according to the consonant. USB flash drive is a kind of flash memory, so it is sometimes called flash drive.
4. Insert the USB flash drive into the computer, restart and press Del or F2 or F1 or F10 or esc and other keys to enter the BIOS interface. Under the boot item selection menu interface, select the usb item and press the Enter key to enter the USB disk reinstallation page. Reinstalling the system can solve some problems caused by viruses and various system problems for unknown reasons.
1. Method 2, press the power-on key to start up, and press the f2 key to enter the bios setting interface when starting up. As shown in the figure below, you can select Boot Option #1 and change it to the boot disk. Then press F10, save the settings, and restart to start from the boot disk.
2First of all, press the F2 key to enter the BIOS interface. Note: After the UEFI BIOS model enters the BIOS homepage, please press the F7 key to enter the Advanced settings page.
3. Due to the different motherboards of the computer, the method of entering the BIOS is not necessarily the same, but generally, when you just press the power-on button and press the F2 or F12 or enter or DEL key when the motherboard interface appears, please search for your computer motherboard model and how to enter the BIO. S.
1. Plug the USB disk into On the computer with the system installed, press delete (F1FF9, slightly different depending on the computer) to enter the BOIS settings after booting, and set the firstbootdevice to USB (or with USB) in the boot item (some say startup) Press F10 to save the word item.
2. There are two ways to install the system with a USB flash drive on a desktop computer: the first method: plug the USB flash drive into the USB port of your computer, and press the F2 key or DEL key when turning on to enter the BIOS system;Note: Depending on the machine model, the button to enter the BIOS may be different.
3. It is more and more convenient to use the USB disk to install the system, because the desktop motherboard supports the selection of the USB disk to start through shortcut keys, generally starting with F, but different desktops are different when pressing F, some F12, some F11, and some may need to enter the bios to modify the option.
4. Shortcut key to enter the USB flash drive installation system. First, plug the USB flash drive into the computer, and then turn on or restart the computer. When the system restarts, press the F12 shortcut key continuously. Of course, the shortcut keys of different brands of computers will be different. You can refer to the details shown in the figure below.
OKX Wallet app download for Android-APP, download it now, new users will receive a novice gift pack.
1. Press the F2 key or DEL key to enter BI when the USB disk installation system is turned on.OS system, select USB HDD SanDisk Cruzer Edge, that is, you choose to boot from the USB flash drive. The next time you start it, you will automatically read the information from the USB flash drive for system installation.
2. Install the USB disk system, press the USB disk startup shortcut (FF2) when the computer is turned on, and then you can enter the USB disk installation tool, and then proceed to the installation process of the USB disk installation system. After the installation is completed, it will automatically restart and automatically enter the computer desktop.
3. After the setting is completed, press the F10 key to save, and then press the ESC key to exit. Restart the computer to enter the USB disk boot interface. USB disk is the abbreviation of USB disk, which is also called USB disk according to the consonant. USB flash drive is a kind of flash memory, so it is sometimes called flash drive.
4. Insert the USB flash drive into the computer, restart and press Del or F2 or F1 or F10 or esc and other keys to enter the BIOS interface. Under the boot item selection menu interface, select the usb item and press the Enter key to enter the USB disk reinstallation page. Reinstalling the system can solve some problems caused by viruses and various system problems for unknown reasons.
1. Method 2, press the power-on key to start up, and press the f2 key to enter the bios setting interface when starting up. As shown in the figure below, you can select Boot Option #1 and change it to the boot disk. Then press F10, save the settings, and restart to start from the boot disk.
2First of all, press the F2 key to enter the BIOS interface. Note: After the UEFI BIOS model enters the BIOS homepage, please press the F7 key to enter the Advanced settings page.
3. Due to the different motherboards of the computer, the method of entering the BIOS is not necessarily the same, but generally, when you just press the power-on button and press the F2 or F12 or enter or DEL key when the motherboard interface appears, please search for your computer motherboard model and how to enter the BIO. S.
1. Plug the USB disk into On the computer with the system installed, press delete (F1FF9, slightly different depending on the computer) to enter the BOIS settings after booting, and set the firstbootdevice to USB (or with USB) in the boot item (some say startup) Press F10 to save the word item.
2. There are two ways to install the system with a USB flash drive on a desktop computer: the first method: plug the USB flash drive into the USB port of your computer, and press the F2 key or DEL key when turning on to enter the BIOS system;Note: Depending on the machine model, the button to enter the BIOS may be different.
3. It is more and more convenient to use the USB disk to install the system, because the desktop motherboard supports the selection of the USB disk to start through shortcut keys, generally starting with F, but different desktops are different when pressing F, some F12, some F11, and some may need to enter the bios to modify the option.
4. Shortcut key to enter the USB flash drive installation system. First, plug the USB flash drive into the computer, and then turn on or restart the computer. When the system restarts, press the F12 shortcut key continuously. Of course, the shortcut keys of different brands of computers will be different. You can refer to the details shown in the figure below.
Binance app download Play Store
author: 2025-02-28 07:39339.39MB
Check836.66MB
Check929.55MB
Check191.65MB
Check985.71MB
Check981.53MB
Check852.28MB
Check273.88MB
Check697.57MB
Check289.15MB
Check284.76MB
Check935.44MB
Check562.42MB
Check183.55MB
Check917.91MB
Check225.96MB
Check919.43MB
Check915.55MB
Check422.11MB
Check793.69MB
Check882.35MB
Check197.25MB
Check711.78MB
Check617.29MB
Check619.83MB
Check196.75MB
Check626.75MB
Check289.83MB
Check299.44MB
Check884.28MB
Check682.91MB
Check732.43MB
Check488.52MB
Check978.52MB
Check764.39MB
Check221.45MB
CheckScan to install
OKX Wallet app download for Android to discover more
Netizen comments More
2277 八面圆通网
2025-02-28 09:08 recommend
1594 无咎无誉网
2025-02-28 08:58 recommend
1166 应付裕如网
2025-02-28 08:37 recommend
1806 富国强兵网
2025-02-28 07:57 recommend
1500 羞与为伍网
2025-02-28 07:55 recommend